Indoor 4C Self-Adhesive Vinyl

The workhorse for indoor-situations


The 4C indoor self-adhesive vinyl is best used in dry environments, such as supermarkets, shopping malls, stores, train stations, airports etc.

Indoor 4C Vinyl self-adhesive foil

Characteristics

Description Soft PVC film available in white and transparent. Surface glossy and matt.
Release paper Silicon coated paper on one side, 135 g/m2.
Adhesive Polyacrylate, removable
Area of use For short- and medium-term outdoor applications such as markings, inscriptions and decorations. Indoor exposure is almost unlimited.
Printing method Screen printing is recommended. Special inks are necessary for UV-offset printing and flexoprinting.
Technical data
Thickness* (without protective paper and adhesive) 200 micron
Dimensional stability (FINAT TM 14) adhered to steel, no measurable shrinkage in cross direction, in length 0.4 mm max.
Temperature resistance adhered to aluminium, -40 degrees celsius to +80 degrees celsius, no variation
Water resistance adhered to aluminium, after 48h/23 degrees celsius no variation
Adhesive power* (FINAT TM 1, after 24h, stainless steel) 6 N/25 mm
Tensile strength (DIN EN ISO 527) along min. 19 MPa
across min. 19 MPa
Elongation at break (DIN EN ISO 527) along min. 130%
across min. 150%
Shelf life** 2 years
Application temperature min. +10 degrees celsius
Service life by specialist application under vertical outdoor exposure (normal climate of Central Europe) 3 years (not printed)
Removability within 2 years residueless removable from most surfaces


* average    ** in original packaging, at 20 degrees celsius and 50% relative humidity

Attention:

Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination which could affect the adhesion of the material. Freshly lacquered or painted surfaces should be allowed to dry for at least three weeks and to completely cure respectively. The compatibility of selected lacquers and paints should be tested by the user, prior to application of the material. Furthermore the individual application informations are to be considered.


More information

©2004 - 2017 SHAPESHIFTER MEDIA - ALL RIGHTS RESERVED

PRODUCTS:

INFOS:

More: